Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Spezifikationen:
Teilenummer: 4M-100-101
Material: Messing
Farbe: Schwarz
Menge: 1 Set
Gewicht der Lenkknöchel: 13g/Stk (0,4 Unzen)
Gewicht des Gegengewichts: 8g/Stk (0,29 Unzen)
Paketliste:
1 * Messing-Frontlenkknöchel-Set
TruckGuy
Bewertet in den USA am4. März 2025
The black finish on one of the parts I received has a pretty large blemish and a few smaller marks. Other than that, they are functional and fit fine on my Injora diamond axles. They add a nice amount of weight.
Adam Barmichael
Bewertet in den USA am25. Februar 2025
First, the screws are too long which cause the inside knuckle bushing to bind on CV joint (knuckle thread’s are open to bushing race allowing screw’s to pinch bushing from both sides) .First fix, Had to lock tight screws and back them off from hitting bushing or use stock screws which have screw stops.Second, when installing the stock wheel/tires any pressure against hex hub caused binding so bad the wheels wouldn’t turn at all.Second fix, used a spacer (came with the Injura servo) that’s fits over wheel shaft threads but doesn’t go past thus keeping any pressures off hex hub.It was a real pain trying to figure out what was causing the wheels to bind over and over.
Customer
Bewertet in den USA am12. März 2025
Counterweights fit good although I had to put a washer behind the wheel to space it due to binding but I got sent the wrong knuckles. The ones I got don’t have holes to bolt the counterweights to.
Huey
Bewertet in den USA am5. September 2024
I had some cheap hubs that looked like fake rotors. They were the heaviest at the time but getting to the shock screws in the axle required disassembling the steering hub. Injora solved that by making the knuckles and axle weights multiple pieces. Adds weight up front where it's needed and tunable with the 2 sets of weights. Clears all my wheels and no issues with bearing fitment.
JRFlurry
Bewertet in den USA am15. November 2024
Absolutely love these. Really like that you can change the way. The weight is distributed. It worked well on both the stock hubs and aftermarket hubs.. these do add a lot of weight so make sure you have a good servo.
Produktempfehlungen
